Наукові статті
Постійне посилання зібранняhttps://repository.lntu.edu.ua/handle/123456789/329
Переглянути
10 результатів
Результати пошуку
Item type:Наукова стаття, Оптимізація цифрових двійників модульних виробничих станцій FESTO(Луцьк: ЛНТУ, 2025-02-12) Мисковець, Сергій Васильович; Фещук, Юрій, Петрович; Фещук, Максим, Юрійович; Півоварчук, Юрій, АрсеновичВ роботі розглянуті питання створення, впровадження та оптимізації цифрових двійників модульних виробничих станцій FESTO. Шляхом моделювання досліджено роботу програмної та апаратної частини виробнич.Item type:Наукова стаття, Корекції CAD моделей для оптимізації процесів 3D друку(Луцьк: ЛНТУ, 2025-02-12) Мисковець, Сергій Васильович; Гусачук, Дмитро Анатолійович; Кашицький, Віталій, Павлович; Парфентьєва, Інна, ОлександрівнаВ роботі розглянуті питання покращення якості та функціональності виробів, отриманих з використанням технологій FDM друку. На основі досліджень впливу геометричних параметрів цифрових моделей на якість формоутворення деталей запропоновано метод корекції їх конфігурації на стадії їх підготовки.Item type:Наукова стаття, Design of biocomposites based on a glutinous matrix with a combined content of wood flour and chopped stalks of grain crops(Kharkiv: TECHNOLOGY CENTER, 2026) Sadova, Oksana; Kashytskyi, Vitalii; Tkachuk, ValentynaThis study considers biocomposite materials based on a glutinous matrix and fillers of plant origin. Waste from the woodworking industry and the agricultural sector is a promising raw material for obtaining fillers for biocomposite materials, which are characterized by a high degree of environmental safety and renewable raw material base. The task addressed is to optimize the amount of technological additive (water) in the glutinous composition, which contributes to the formation of a dense structure of the biocomposite material with a compact arrangement of particles of the combined mixture of fillers. In the process of research, the effectiveness of using fillers of different granulometric composition against the effect of mechanical loads was determined. The complex effect of fillers of plant origin on the mechanical characteristics of biocomposite materials was studied, which made it possible to define the optimal composition of the biocomposite. An analysis of the effect of the amount of moisture in the composition on the formation of the structure and the resistance of the biocomposite material to the effect of static and dynamic loads was carried out. The maximum values of the ultimate compressive strength (115–120 MPa) were obtained for biocomposites containing a mixture of fillers of different granulometric composition (40–80% of cereal stalk particles, the remaining particles of wood flour) provided that 30% of moisture is removed from the composition. The maximum impact strength (13.8 kJ/m2) was established for biocomposites containing 100% of crushed cereal stalks provided that 10% of moisture is removed from the composition. The designed materials could be used to manufacture packaging elements that are disposed of after operation by recycling or through safe decomposition at landfills without harm to the environment.Item type:Наукова стаття, The development of glutin-based biocomposite materials with advanced hydrophobicity(Lutsk: LNTU, 2024) Kashytskyi, Vitalii; Sadova, Oksana; Shehynskyi, OlehBiocomposite materials, which contain components of natural origin, have low resistance to water absorbtion due to high lyophilicity of components. It leads to quick destruction of biocomposite products under the conditions of high humidity exploitation that defines the necessity and importance of conducting scientific research in this sphere. The aim of the article is to research the hydrophobic additives influence on the compressive strength and hygroscopicity of biocomposite materials consisting of glutin matrix (100 parts by weight) and wood flour (100 parts by weight). The technology of forming biocomposite materials includes a step-by-step pressing the composition at a pressure of 10-15 MPa and a heat treatment of the product in a press mold at a temperature of 140°C. Experimental methods of investigating the biocomposite materials compressive strength and hygroscopicity were used in the work. It was experimentally determined that the modifying additive (paraffin) optimal content is 4 parts by weight per 100 parts by weight of biopolymer matrix. At this content, there is an increase compressive strength by 2.8-4.6 times of the biocomposite materials compared to biocomposites with different paraffin content. As a result of the state analysis of biocomposite samples which were destroyed under the static loading influence, the features of the cracks occurrence and propagation in biocomposites depending on different modifying additive content, the conduct of the composition preliminary processing or biocomposites additional processing in a thermal field were determined. The use of protective hydrophobic coatings on the biocomposite samples surface provided an increase in the biocomposites resistance to the moisture negative influence. The most effective were coatings based on a paraffin solution, which provided a reduction in water absorption by 45-50% compared to biocomposites coated with wax, drying oil Oksol, and sunflower oil. The complex use of hydrophobic substances as modifying additives and protective coatings has practical significance, as they positively affect the processes of forming the structure, increasing the strength and hydrophobicity of biocomposite materials used in a humid environmentItem type:Наукова стаття, Формування епоксикомпозитів на основі рециклованих наповнювачів синтетичного походження(Луцьк: ЛНТУ., 2026) Кашицький, Віталій Павлович; Садова, Оксана ЛеонідівнаПредставлено методику переробки скловолокнистих полімеркомпозитних матеріалів методом механічного подрібнення з наступною класифікацією частинок та формуванням епоксикомпозитних зразків. Визначено підвищення фізико-механічних характеристик епоксикомпозитних матеріалів на основі вторинної сировини, що структуровані за кінцевої температури 170°С. Встановлено зниження міцності на стискання та вмісту гель-фракції епоксикомпозитного матеріалу в результаті введення до складу композиції наповнювача в кількості більше 200 мас.ч., однак використання наповнювача в кількості 600 мас.ч. забезпечує зростання ударної в'язкості епоксикомпозитів. Використання частинок вторинної сировини меншого розміру покращує технологічність композиції та міцність на стиснення епоксикомпозитів.Item type:Наукова стаття, Study of mechanical properties and structure of biomposits filled with chopped stalks of cereals crops(Луцьк: ЛНТУ, 2024) Sadova, OksanaВ статті досліджено міцність на стискання біокомпозитних матеріалів на основі глютинової матриці, яку готували за різного співвідношення компонентів. Як напонювач для біокомпозитних матеріалів використано подрібнені стебла зернових культур. Досліджено міцність на стискання біокомпозитів залежно від ступеня підсушування композиції. Проведення додаткової термічної обробки забезпечило підвищення механічних характеристик біококомпозитів. Ударну в’язкість матеріалу визначено залежно від вмісту наповнювача, ступеня підсушування та тиску пресування композиції, а також проведення додаткової термічної обробки біокомпозитів. Структуру біокомпозитів досліджено методом ІЧ-спектроскопії на основі аналізу функціональних груп.Item type:Наукова стаття, Study of mechanical properties and structure of biomposits filled with coffee grounds(Луцьк: ЛНТУ, 2025) Sadova, Oksana; Kashytskyi, Vitalii; Husachuk, DmytroВ статті досліджено міцність на стискання біокомпозитних матеріалів на основі глютинової матриці та кавової гущі залежно від вмісту наповнювача та ступеня підсушування композиції. Визначено міцність на стискання біокомпозитів залежно від концентрації біополімерної матриці, вмісту композиції в прес-формі, температури основної термічної обробки та додаткової термічної обробки. Досліджено, що максимальну міцність на стискання 79,6 МПа мають біокомпозитні матеріали із ступенем підсушування 20%. Також досліджено мікроструктуру біокомпозитів оптимального складу (вміст кавової гущі в кількості 200 мас. ч.) зі ступенем підсушування композиції 20%.Item type:Наукова стаття, Designing tribotechnical epoxy composite materials reinforced with chopped fibers and modified with silicon organic varnish(Kharkiv: Technological center, 2024) Sadova, Oksana; Kashytskyi, Vitalii; Tkachuk, Valentyna; Shehynskyi, Oleh; Parfentyeva, InnaThe object of research is modified epoxy composite materials containing fibrous fillers treated in physical fields. The technological features of the development of tribotechnical epoxy composites, which must withstand the effects of elevated temperatures, have been considered. In this case, it is necessary to modify the structure of the epoxy polymer matrix, which is achieved as a result of the introduction of heat-resistant organosilicon varnish. Organosilicon varnishes and chopped fibers contain technological additives, which complicates the process of structuring epoxy composites and leads to the appearance of structural defects. Removal of technological additives and cleaning the surface of the aramid and glass fibers from lubricants is possible as a result of processing the components of the composition in physical fields. There is a need to study the influence of physical fields on the structuring processes of the epoxy system and the formation of the structure of epoxy composites with specified properties. Modified epoxy composites contain chopped aramid and glass fibers treated with ultrasound. The tribotechnical characteristics of epoxy composites were studied at a sliding speed of V=1.0 m/s with a change in specific load from 0.5 MPa to 1.5 MPa. The temperature in the tribocontact zone during frictional interaction rises to 100 °C with an increase in the specific load. An increase in the density of the surface layer of tribocontact of epoxy composites with fillers treated in physical fields was revealed. The practical recommendations have been compiled for the implementation of the treatment technology of components in physical fields, which ensures structuring of epoxy composites with high tribotechnical characteristicsItem type:Наукова стаття, Development of glutinous biocomposite materials filled with coffee grounds(Lutsk: LNTU, 2024) Sadova, Oksana; Kashytskyi, Vitalii; Shehynskyi, OlehThe intensive development of biocomposite materials is associated with the use of waste from agricultural production or the food industry as raw materials. Such raw materials are renewability and eco-friendly, but require special processing for preparation for use as a filler and development of methods of forming biocomposite products, which determines the high relevance of research in this direction. The aim of the work was to study the intensity of the influence of the mechanical and thermal fields on the mechanical properties and nature of the structuring of glutinous biocomposite materials with a high content of coffee grounds (190-200 wt. parts). The forming technology of biocomposite materials consisted in heat treatment of the composition. Next stages are pressing and holding of composition at a temperature of 150°C under a pressure of 8-11 MPa. The work used the methods of determining a compressive strength and an impact toughness. The method of infrared spectroscopy was also used to study structuring processes. It was established that the use of coffee grounds in the quantity of 200 wt. parts provides an increase in compressive strength up to 75.8 MPa under the condition of forming a biocomposite material with a density of 1.17 g/сm3. An increase in the resistance of biocomposites to dynamic loads occurs in the case of the introduction of a filler in the amount of 190 wt. parts using a preliminary pressing at a specific load of 8 MPa. The practical significance of this work lies in developing an optimal thermo-mechanical processing mode, involving maximum exposure of the composition in a press mould within a thermal field for 2 hours, which enhances the mechanical properties of glutinous biocomposite materials.Item type:Наукова стаття, Актуальні питання структурних перетворень в полімеркомпозитах під впливом фізичних полів: огляд(Луцьк: ЛНТУ., 2026) Садова, Оксана Леонідівна; Кашицький, Віталій ПавловичВ статті проведено аналіз літературних джерел в контексті формування полімеркомпозиційних матеріалів під впливом фізичних полів, які забезпечують інтенсивне структурування композиції на основі реактопластів. Подано характеристику фізичних полів та особливості структурних перетворень на рівні тонкої структури та надмолекулярних утворень, які відбуваються в результаті зовнішнього енергетичного впливу. Доведено позитивний вплив фізичних полів на процеси структурування полімеркомпозитних матеріалів на основі реакційноздатних полімерів за рахунок впорядкування структурних складових, а також формування полімеркомпозитів з низьким напруженим станом та високим ступенем структурування полімерної матриці.