Наукові статті
Постійне посилання зібранняhttps://repository.lntu.edu.ua/handle/123456789/426
Переглянути
4 результатів
Результати пошуку
Item type:Наукова стаття, Clarifying Differences in the Manifestation of Young Men’s Motor Fitness Components in the Absence of Compulsory Physical Activity(2025-03-30) Banakh, Volodymyr; Iedynak, Gennadii; Blavt, Oksana; Faidevych, Volodymyr; Hrebik, Oleh; Musiyenko, OlenaBackground. The current trend in the modernization of university physical education involves the development of a personal educational trajectory for each student. Objectives. The study aimed to determine the peculiarities in the development of young male students’ motor fitness components, taking into consideration their somatotypes and the absence of compulsory physical activity at the university. Materials and methods. The study involved 39 young men aged 17.6±0.5 years who had just started studying at the university, belonged to different somatotypes and had no restrictions in the use of different physical activity parameters. The somatotype was determined using the modified Stefko-Ostrovsky method. The 11 main components of motor fitness were examined, using motor tests recommended by researchers, appropriate testing methods and instruments. Each test met the requirements of reliability, informativeness and allowed to evaluate speed, frequency of movements, ability to balance, power, explosive strength of arms and legs, abdominal muscle strength, arm strength, flexibility, agility and aerobic endurance. The parameters of these components were determined in each available somatotype, and each parameter was compared with different somatotypes. Testing was conducted at the beginning (January) and at the end (May-June) of the academic semester, but during one academic year. Results. At the beginning and at the end of the study, it was noted that there were differences in the development of motor fitness components among the various somatotypes when compared with each other (p at the level from 0.05 to 0.000). The volumes and conditions of physical activity realization used during the study contributed to the change of young men’s results in some components. However, these alterations varied across different somatotypes. Conclusions. The information about peculiarities of the development of motor fitness components among individuals with different somatotypes is important for increasing the efficiency of university physical education based on the personalization of content and differentiation of normative bases of this process.Item type:Наукова стаття, Digitalization of “Timed Up and Go” Test to Increase the Control Efficiency in Inclusive Physical Education(2026-05-30) Blavt, Oksana; Galamanzhuk, Lesia; Iedynak, Gennadii; Larysa, Kozibroda; Banakh, Volodymyr; Faidevych, Volodymyr; Holub, Viktor; Stadnyk, VolodymyrObjectives. The purpose of this study was to establish the reliability and validity of the “Timed Up and Go” (TUG) test for students with disabilities who have undergone lower limb amputation using an intelligent software-controlled hardware complex in inclusive physical education. Materials and Methods. The study was conducted at the theoretical and empirical levels. The following methods were used: analysis, synthesis, systematization, generalization, measurement, and mathematical statistics. Measurements were performed using the TUG test. The study sample included first-year male students with a left lower limb amputation (n = 23), provided there were no acute conditions, open wounds, or complications. Results. The results of the study are presented in the developed intelligent software-controlled hardware system for implementing the TUG test. The structural composition of the system includes Bluetooth-enabled wireless sensors placed on the student and along the entire TUG trajectory. The signals received by the Xsens DOT sensors are transmitted to the latest Arduino Uno R3 microcontroller. Information display and control are provided through the use of a Liquid Crystal Display. A distinctive feature of the complex is the use of IoT technologies for analytics and forecasting in inclusive physical education. Automated acquisition of TUG results enables the recording of numerous gait parameters in students with disabilities and lower limb amputation, such as the amplitude of central oscillations, reaction time, and step length, which cannot be recorded when TUG results are measured using a stopwatch. Digital data processing transforms the reliability and validity of the TUG test from "average" when measured with a stopwatch to "high", ensuring accurate recording of numerous parameters down to the microsecond level. Conclusions. The novelty of the developed intelligent programmable tool for implementing the "Get Up and Go" test ensures effective control in inclusive physical education and eliminates the influence of the human factor on test results.Item type:Наукова стаття, TEST CONTROL OF INCLUSIVE PHYSICAL EDUCATION: ASSESSMENT USING THE NEWEST ELECTRONICS(2023-12) Blavt, Oksana; Iedynak, Gennadii; Galamanzhuk, Lesia; Zhygulova, Evelinа; Mykhalskа, Yulia; Khomych, Anatolii; Sovtisik, DmytroThe purpose of the study was to determine the effectiveness of a device developed based on the latest electronics to control the coordination of movements of the lower limbs of tudents with disabilities. Materials and methods. 34 students with disabilities were involved in the study. At the time of the experiment, they had functional disorders of the lower limbs as a result of injuries and received a doctor’s permission to participate in the experiment. The research was conducted at the theoretical and empirical levels, using the following methods: analysis, synthesis, systematization, generalization, technical modeling, pedagogical testing, and mathematical statistics. Results. In the research process, a device was used, which was developed as part of the conducted research. The device consists of two rubber mats in which capacitive proximity sensors are placed. The test task involves recording the number of touches of rubber mats in 20 seconds. The information received from the sensors during the student’s performance of the test task, namely the alternate touching of the rubber mat with the big toe, is sent to the microcontroller via an infrared communication line. The development uses a high-performance microcontroller ATMega 328P, which can support a wide range of sensors and generate information about the time and frequency of leg movements. The signals of the student’s toes touching the rubber mats, received by capacitive sensors, are processed by a microcontroller and displayed on a PC through a serial connection and using the Arduino software, which allows reading the received information about the execution of movements. Under the conditions of the pedagogical experiment, we tried to determine the quality of the measurement results. According to the obtained numerical indicators, the numerical values of the test authenticity obtained by the traditional method of fixing the results by a specialist correspond to the value “low”. The results of the validity calculations showed that the correlation between the test measurement results and the evaluation results using the developed device was optimal with a correlation coefficient greater than 0.6. Conclusions. The importance of a high level of development of the coordination of movements of the lower limbs of students with disabilities is determined by the need to develop this quality to ensure the effectiveness of their rehabilitation in the process of inclusive PE. The analysis of the obtained material allows us to state that the practical application of the inclusive PE device developed based on the latest electronics will allow scientifically based optimization of this process to ensure its effectiveness.Item type:Наукова стаття, Determining the Quality of Measuring the Level of Lower Extremity Joint Movement in Inclusive Physical Education Using Electronic IT Resources(2024-04) Mykytyuk, Zinoviy; Blavt, Oksana; Iedynak, Gennadii; Galamanzhuk, Lesia; Klius, Olena; Panasiuk Oleksandr; Kovalchuk, Volodymyr; Khomych, AnatoliiObjectives. The study aimed to investigate the quality characteristics of the tool developed based on electronic IT resources for measuring the level of movements in the joints of the lower limbs of students with disabilities caused by injuries. Material and methods. The experimental study involved 32 first-year students who had sustained lower limb injuries as a result of the war and were in remission. The methods used included analysis, synthesis, systematization, generalization, technical modeling, pedagogical experiments, and mathematical statistics. Results. A means of measuring movements in the joints of the lower limbs has been developed using electronic IT resources. The basis of the tool is a measuring line consisting of a printed circuit board on which is placed a design of capacitive sensors, a switching line, and a signal converter that measures the signal received by the sensors. The measurement results are transmitted to the controller and then to the PC via an interface implemented based on Bluetooth wireless technology. To implement the measuring tool, a controller is used, which has a board built on the synthesis of the Arduino electronic hardware platform and the Raspberry Pi minicomputer. The test results are displayed on the PC monitor screen. The determination of the qualitative characteristics of the test, in the case of recording the results of a tool developed on the basis of electronic IT resources for measuring the level of movements in the joints of the lower limbs of students with disabilities, established that the level of reliability of the test is above 0.90 (“excellent”) validity – from 0.6 (“high”). Empirical data collected directly from the experiment have a low level of reliability: qualitative indicators of reliability in the range are below 0.70 (“may have limited applicability”), validity – < 0.3 (“low validity”). Conclusions. Developed based on electronic IT resources, the tool for measuring the level of movements in the joints of the lower limbs of students with disabilities due to limb injuries has significant advantages, such as the availability of functions, ease of use and efficiency. Ensuring high efficiency and objectivity of control contributes to performing control operations in real-time. By using assessment tools with a high level of reliability and validity, we ensure the detection of reliable changes in the state of the joints of the lower limbs of students with disabilities, thus eliminating the influence of errors in making managerial decisions in the planning process of their PE.